Convective storms are one of the severe weather hazards found during the warm
season. Doppler weather radar is the only operational instrument that can
frequently sample the detailed structure of convective storm which has a small
spatial scale and short lifetime. For the challenging task of short-term
convective storm forecasting, 3-D radar images contain information about the
processes in convective storm. However, effectively extracting such information
from multisource raw data has been problematic due to a lack of methodology and
computation limitations. Recent advancements in deep learning techniques and
graphics processing units now make it possible. This article investigates the
feasibility and performance of an end-to-end deep learning nowcasting method.
The nowcasting problem was transformed into a classification problem first, and
then, a deep learning method that uses a convolutional neural network was
presented to make predictions. On the first layer of CNN, a cross-channel 3D
convolution was proposed to fuse 3D raw...

more |
pdf
| html
arxiv_cscv:
Convolutional Neural Network for Convective Storm Nowcasting Using 3D Doppler Weather Radar Data https://t.co/AQGMGONl7G

arxiv_cscv:
Convolutional Neural Network for Convective Storm Nowcasting Using 3D Doppler Weather Radar Data https://t.co/AQGMGONl7G

arxiv_cscv:
Convolutional Neural Network for Convective Storm Nowcasting Using 3D Doppler Weather Radar Data https://t.co/AQGMGONl7G

arxiv_cs_cv_pr:
Convolutional Neural Network for Convective Storm Nowcasting Using 3D Doppler Weather Radar Data. Lei Han, Juanzhen Sun, and Wei Zhang https://t.co/DeFiv5GjUA

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 5675

Unqiue Words: 1911

In this study we develop a single-station deep-learning approach for fast and
reliable estimation of earthquake magnitude directly from raw waveforms. We
design a regressor composed of convolutional and recurrent neural networks that
is not sensitive to the data normalization, hence waveform amplitude
information can be utilized during the training. Our network can predict
earthquake magnitudes with an average error close to zero and standard
deviation of ~0.2 based on single-station waveforms without instrument response
correction. We test the network for both local and duration magnitude scales
and show a station-based learning can be an effective approach for improving
the performance. The proposed approach has a variety of potential applications
from routine earthquake monitoring to early warning systems.

more |
pdf
| html
None.

arxiv_org:
A Machine-Learning Approach for Earthquake Magnitude Estimation. https://t.co/9mzd7mvwKB https://t.co/QHHDNFKydK

ChaiBapchya:
It's after reading papers like these - https://t.co/CXEEFN5XOV that I feel the need to develop a system that can generate code for model building. Letting domain experts to ideate and do what they do best rather than solve "dropout requires 1 parameter" errors. @ApacheMXNet

Memoirs:
A Machine-Learning Approach for Earthquake Magnitude Estimation. https://t.co/jpELHB1KxA

cristobalvega:
RT @arxiv_org: A Machine-Learning Approach for Earthquake Magnitude Estimation. https://t.co/9mzd7mvwKB https://t.co/QHHDNFKydK

SrirangaTarun:
RT @arxiv_org: A Machine-Learning Approach for Earthquake Magnitude Estimation. https://t.co/9mzd7mvwKB https://t.co/QHHDNFKydK

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 0

Unqiue Words: 0

Plate motion near the fault gouge layer, and the elastic interplay between
the gouge layer and the plate under stick-slip conditions, is key to
understanding the dynamics of sheared granular fault systems. Here, a
two-dimensional implementation of the combined finite-discrete element method
(FDEM), which merges the finite element method (FEM) and the discrete element
method (DEM), is used to explicitly to simulate a sheared granular fault
system. We focus on investigating the influence of normal load, driving shear
velocity and plate stiffness on the velocities and displacements measured at
locations on the upper and lower plates just adjacent to the gouge in the
direction parallel to the shear direction (x direction). The simulations show
that at slips the plate velocities are proportional to the normal load and may
be inversely proportional to the square root of the plate's Young's modulus;
whereas the driving shear velocity does not show distinct influence on the
plate velocities. During stick phases, the velocities of the...

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 0

Unqiue Words: 0

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

*Tracking 223,042 papers.*

Sort results based on if they are interesting or reproducible.

Interesting

Reproducible