This article investigates the stability of 'laser sail'-style spacecraft
constructed from dielectric metasurfaces with areal densities $<$1g/m$^2$. We
show that the microscopic optical forces exerted on a metasurface by a high
power laser (100 GW) can be engineered to achieve passive self-stabilization,
such that it is optically trapped inside the drive beam, and self-corrects
against angular and lateral perturbations. The metasurfaces we study consist of
a patchwork of beam-steering elements that reflect light at different angles
and efficiencies. These properties are varied for each element across the area
of the metasurface, and we use optical force modeling tools to explore the
behavior of several metasurfaces with different scattering properties as they
interact with beams that have different intensity profiles. Finally, we use
full-wave numerical simulation tools to extract the actual optical forces that
would be imparted on Si/SiO$_{2}$ metasurfaces consisting of more than 400
elements, and we compare those results to our...

more |
pdf
| html
qraal:
[1903.09077] Self-stabilizing laser sails based on optical metasurfaces https://t.co/8xKzsHL3TP

mickeykats:
New preprint: "Self-stabilizing laser sails based on optical metasurfaces" https://t.co/uyZGTVjHeX
This is a collaboration with + led by Victor Brar's group in the Physics Dept @UWMadison. On my group's side, funded by @AFOSR https://t.co/HF5bF0RLNt

CondensedPapers:
Self-stabilizing laser sails based on optical metasurfaces. https://t.co/GeSWBPFU0v

StarshipBuilder:
Self-stabilizing laser sails based on optical metasurfaces
https://t.co/qS1DBmOWVB

AFOSR:
RT @mickeykats: New preprint: "Self-stabilizing laser sails based on optical metasurfaces" https://t.co/uyZGTVjHeX
This is a collaboration…

nyrath:
RT @StarshipBuilder: Self-stabilizing laser sails based on optical metasurfaces
https://t.co/qS1DBmOWVB

A_J_Higgins:
RT @StarshipBuilder: Self-stabilizing laser sails based on optical metasurfaces
https://t.co/qS1DBmOWVB

None.

None.

Sample Sizes : None.

Authors: 6

Total Words: 6775

Unqiue Words: 2022

We propose and substantiate experimentally the cascaded rotational Doppler
effect for interactions of spinning objects with light carrying angular
momentum. Based on the law of parity conservation for electromagnetic
interactions, we reveal that the frequency shift can be doubled through
cascading two rotational Doppler processes which are mirror-imaged to each
other. This effect is further experimentally verified with a rotating half-wave
plate, and the mirror-imaging process is achieved by reflecting the
frequency-shifted circularly polarized wave upon a mirror with a quarter-wave
plate in front of it. The mirror symmetry and thus parity conservation
guarantees that this doubled frequency shift can be further multiplied with
more successive mirror-imaging conjugations, with photons carrying spin and/or
orbital angular momentum, which could be widely applied for detection of
rotating systems ranging from molecules to celestial bodies with high precision
and sensitivity.

more |
pdf
| html
PhysicsPaper:
Cascaded Rotational Doppler Effect. https://t.co/obJUnaYEef

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 3252

Unqiue Words: 1163

A standard triangular aperture for measuring the orbital angular momentum
(OAM) of light by diffraction usually has a fixed and limited radius R. This
possesses a crucial issue since for an increasing topological charge m of an
OAM beam, the radius r of the beam also increases. Here, we prove
experimentally our supposition. We use a dynamic triangular aperture that can
be programmed to have different characteristic R to diffract beams of various
OAM values. By analysing the diffraction patterns with 2d-correlation, we find
a minimum bound for R. For a constant initial waist $w$ in the spatial light
modulator and a constant position z of the aperture system, we find that the
radius of the aperture is unique for each m value. Interestingly, this R scales
according to the literature-reported beam's rms radius. We also show that with
larger aperture, a smearing effect can be seen in the diffraction patterns
which becomes a setback on discerning fringes for the measurement of the
topological charge value and thus of the OAM of light....

more |
pdf
| html
PhysicsPaper:
Proper scaling for triangular aperture in OAM measurement. https://t.co/x8Esm1cwtC

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 5030

Unqiue Words: 1716

Laser is one of the most important discoveries in the 20th century, and
inorganic semiconductor lasers (ISCL) are most frequently used in many
applications nowadays. Organic semiconductor lasers (OSCL) have many attractive
features when they compared to ISCLs, such as flexibility, human friendliness,
feasible and inexpensive production process, light weight, and multicolor
emission. However, electrically driven OSCLs (el-OSCL) have not yet been
realized, although they are possible in an optically driven mode. Here, we
report that an el-OSCL can be realized in field-effect transistor (FET)
structure. The FET el-OSCL with distributed feedback (DFB) construction is made
using a BP3T single crystal as a lasing medium electrostatically laminated on a
silicon substrate modified with periodically patterned poly-styrene by applying
a hot embossing method. An emergent sharp-linewidth laser emission spectrum to
the resolution limit of a detector and a non-linear increase in intensity above
the threshold current density of ca.1 kA cm-2 is...

more |
pdf
| html
PhysicsPaper:
The first evidence of current-injection organic semiconductor laser with field-effect transistor. https://t.co/V02Yi9jrfM

None.

None.

Sample Sizes : None.

Authors: 10

Total Words: 4058

Unqiue Words: 1469

We compare the analytical and numerical predictions of noise in nano- and
microcavity lasers obtained from a rate equation model with stochastic Langevin
noise. Strong discrepancies are found between the two approaches and these are
critically analyzed and explained on the basis of general considerations and
through the comparison to the numerical predictions of a Stochastic Laser
Simulator. While the analytical calculations give reliable redictions, the
numerical results are entirely incorrect thus unsuitable for predicting the
dynamics and statistical properties of small lasers.

more |
pdf
| html
PhysicsPaper:
Analytical vs. Numerical Langevin Description of Noise in Small Lasers. https://t.co/TUAm9MrP49

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 3442

Unqiue Words: 1418

The generation in artificial composites of a magnetic response to light
comparable in magnitude with the natural electric response, may offer an
invaluable control parameter for a fine steering of light at the nanoscale. In
many experimental realizations however, the magnetic response of artificial
meta-atoms is too weak so that there is a need for new designs with increased
magnetic polarizability. Numerical simulations show that geometrical plasmonic
nanostructures based on the ideal model of Platonic solids are excellent
candidates for the production of strong optical magnetism in visible light.
Inspired by this model, we developed a bottom-up approach to synthesize
plasmonic nano-clusters made of twelve gold patched located at the center of
the faces of a dodecahedron. The scattering of the electric and magnetic dipole
induced by light are measured across the whole visible range. The ratio of the
magnetic to electric response at resonance is found three times higher than its
counterpart measured on disordered plasmonic...

more |
pdf
| html
PhysicsPaper:
High optical magnetism of dodecahedral plasmonic meta-atoms. https://t.co/TKt16IGpDR

None.

None.

Sample Sizes : [12, 46812]

Authors: 10

Total Words: 5732

Unqiue Words: 2050

The concept of metamaterials emerged in years 2000 with the achievement of
artificial structures enabling non conventional propagation of electromagnetic
waves, such as negative phase velocity of negative refraction. The
electromagnetic response of metamaterials is generally based on the presence of
optically-resonant elements (or meta-atoms) of sub-wavelength size and well
designed morphology so as to provide the desired electric and magnetic optical
properties. Top-down technologies based on lithography techniques have been
intensively used to fabricate a variety of efficient electric and magnetic
resonators operating from microwave to visible light frequencies. However, the
technological limits of the top-down approach are reached in visible light
where a huge number of nanometre sized elements is required. We show here that
the bottom-up fabrication route based on the combination of nanochemistry and
of the self-assembly methods of colloidal physics provide an excellent
alternative for the large scale synthesis of complex...

more |
pdf
| html
PhysicsPaper:
Self-assembled nanostructured metamaterials. https://t.co/yJZkwgs7EF

None.

None.

Sample Sizes : None.

Authors: 6

Total Words: 4920

Unqiue Words: 2010

Two microring resonators, one with gain and one with loss, coupled to each
other and to a bus waveguide, create an effective non-Hermitian potential for
light propagating in the waveguide. Due to geometry, coupling for each
microring resonator yields two counter-propagating modes with equal
frequencies. We show that such a system enables implementation of many types of
scattering peculiarities, which are either the second or fourth order. The
spectral singularities separate parameter regions where the spectrum is either
pure real or else comprises complex eigenvalues; hence, they represent the
points of the phase transition. By modifying the gain-loss relation for the
resonators such an optical scatterer can act as a laser, as a coherent perfect
absorber, be unidirectionally reflectionless or transparent, and support bound
states either growing or decaying in time. These characteristics are observed
for a discrete series of the incident-radiation wavelengths.

more |
pdf
| html
PhysicsPaper:
Spectral singularities of a potential created by two coupled microring resonators. https://t.co/CoB58Jm7f8

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 4699

Unqiue Words: 1451

We present design, fabrication and characterization of a MEMS VCSEL which
utilizes a silicon-on-insulator wafer for the microelectromechanical system and
encapsulates the MEMS by direct InP wafer bonding, which improves the
protection and control of the tuning element. This procedure enables a more
robust fabrication, a larger free spectral range and facilitates bidirectional
tuning of the MEMS element. The MEMS VCSEL device uses a high contrast grating
mirror on a MEMS stage as the bottom mirror, a wafer bonded InP with quantum
wells for amplification and a deposited dielectric DBR as the top mirror. A 40
nm tuning range and a mechanical resonance frequency in excess of 2 MHz are
demonstrated.

more |
pdf
| html
PhysicsPaper:
Tunable MEMS VCSEL on Silicon substrate. https://t.co/ixE8KBVsYu

None.

None.

Sample Sizes : None.

Authors: 7

Total Words: 6074

Unqiue Words: 1875

The extended boundary condition method can be formulated to study plane-wave
scattering by an ellipsoid composed of an orthorhombic dielectric-magnetic
material whose relative permittivity dyadic is a scalar multiple of its
relative permeability dyadic, when the constitutive principal axes are
arbitrarily oriented with respect to the shape principal axes. Known vector
spherical wavefunctions are used to represent the fields in the surrounding
matter-free space. After deriving closed-form expressions for the vector
spherical wavefunctions for the scattering material, the internal fields are
represented as superpositions of those vector spherical wavefunctions. The
unknown scattered-field coefficients are related to the known incident-field
coefficients by a transition matrix. The total scattering and absorption
efficiencies are highly affected by the orientation of the constitutive
principal axes relative to the shape principal axes, and the effect of the
orientational mismatch between the two sets of principal axes is...

more |
pdf
| html
PhysicsPaper:
Plane-wave scattering by an ellipsoid composed of an orthorhombic dielectric-magnetic material with arbitrarily oriented constitutive principal axes. https://t.co/etQUuzJzIk

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 8359

Unqiue Words: 1835

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

*Tracking 99,599 papers.*

Sort results based on if they are interesting or reproducible.

Interesting

Reproducible