### Top 8 Arxiv Papers Today in Medical Physics

##### #1. A computational model of radiolytic oxygen depletion during FLASH irradiation and its effect on the oxygen enhancement ratio
###### Guillem Pratx, Daniel S Kapp
more | pdf | html
###### Tweets
BioPapers: A computational model of radiolytic oxygen depletion during FLASH irradiation and its effect on the oxygen enhancement ratio. https://t.co/JUeLecBsiK
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 7315
Unqiue Words: 2188

##### #2. Implementation of a Radiation Protection System at Four Hospitals in Ethiopia
###### Gebre Mesay Geletu, Fikru Abiko, Shamble Sahlu
Diagnostic imaging procedure using ionizing radiation has been growing due to its enormous benefits. However, using ionizing radiation is also associated with harmful biological effects. Therefore it is important to take consideration on harmful effects of ionizing radiation and have adequate awareness on the area, in order to protect people without limiting the benefits. In Ethiopia, the status of radiation protection practices have not been studied previously, which remain nearly unknown especially around the study area. Thus, in filing this gap the present study initiated to assess status of implementation of radiation protection system. General observation, questionnaire and dose rate measurements were used to get all necessary data for the study. The dose rate measurements at control room (CR), waiting room (WR) and inside X-ray room (XR) were carried out using well calibrated Thermo FH 40 G-L10 survey meter. The results of the general observation and the questionnaire showed poor practice of radiation protection system. The...
more | pdf | html
###### Tweets
tmertzi: Implementation of a Radiation Protection System at Four Hospitals in Ethiopia. https://t.co/9y39khEsNk
Nuculear: Implementation of a Radiation Protection System at Four Hospitals in Ethiopia. https://t.co/YT15ddzouL
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 2493
Unqiue Words: 950

##### #3. Resonant frequency analysis of dental implants
###### D Rittel, A Dorogoy, G. Haiat, K Shemtov-Yona
Dental implant stability influences the decision on the determination of the duration between implant insertion and loading, This work investigates the resonant frequency analysis by means of a numerical model. The investigation is done numerically through the determination of the eigenfrequencies and performing a steady state response analyses using a commercial finite element package. A peri-implant interface, of simultaneously varying stiffness (density) and layer thickness is introduced in the numerical 3D model in order to probe the sensitivity of the eigenfrequencies and steady state response to an evolving weakened layer, in an attempt to identify the bone reconstruction around the implant. For the first two modes, the resonant frequency is somewhat insensitive to the healing process, unless the weakened layer is rather large and compliant, like in the very early stages of the implantation. A "Normalized Healing Factor" is devised in the spirit of the Implant Stability Quotient, which can identify the healing process...
more | pdf | html
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 6741
Unqiue Words: 2176

##### #4. Estimation of Physiological Motion Using Highly Accelerated Continuous 2D MRI
###### Lynn Johann Frohwein, Florian Büther, Klaus Peter Schäfers
Patient motion is well-known for degrading image quality during medical imaging. Especially positron emission tomography (PET) is susceptible to motion due to its usually long scan times. In hybrid PET/MRI (magnetic resonance imaging), simultaneously acquired dynamic MRI data can be used to correct for motion. Usually, MRI model-based motion correction approaches are applied to the PET data. However, these approaches may fail for non-predictable, irregular motion. We propose a novel approach for the continuous and real-time tracking of motion using highly accelerated, dynamic MRI for an accurate motion estimation. For this purpose, a TurboFLASH sequence is utilized in single-shot mode with additional exploiting GRAPPA acceleration. Sampling frequency for one slice is up to 26 ms and 520 ms for one 3D volume of 20 coronal slices. Principal component analysis and a phase-sensitive resorting of slices is performed to restore temporal consistency of the volumes. Motion is estimated from these volumes using hyper-elastic registration....
more | pdf | html
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 6181
Unqiue Words: 2059

##### #5. Overview of image-to-image translation using deep neural networks: denoising, super-resolution, modality-conversion, and reconstruction in medical imaging
###### Shizuo Kaji, Satoshi Kida
Since the advent of deep convolutional neural networks (DNNs), computer vision has seen an extremely rapid progress that has led to huge advances in medical imaging. There are a plethora of surveys on applications of neural networks in medical imaging. This article does not aim to cover all the aspects of the field but focus on a particular topic of image-to-image translation. Although the topic may sound unfamiliar, it turns out that many seemingly irrelevant applications can be understood as instances of image-to-image translation. Such applications include (1) noise reduction, (2) super-resolution, (3) image synthesis, and (4) reconstruction. The same underlying principles and algorithms work for various tasks. Our aim is to introduce some of the key ideas on this topic from a uniform view point. We try to be less intimidating with descent level of rigour by exmining core ideas using metaphors. We pay a particular attention to introducing jargons specific to image processing using DNNs. Having an intuitive grasp of the key...
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 0
Unqiue Words: 0

##### #6. Evaluation of dental implant stability in bone phantoms: comparison between a quantitative ultrasound technique and resonance frequency analysis
###### Romain Vayron, Vu Hieu Nguyen, Benoît Lecuelle, Guillaume Haiat
Background Resonance frequency analyses and quantitative ultrasound methods have been suggested to assess dental implant primary stability. PurposeThe purpose of this study was to compare the results obtained using these two techniques applied to the same dental implants inserted in various bone phantoms. Materials and MethodsDifferent values of trabecular bone density and cortical thickness were considered to assess the effect of bone quality on the respective indicators (UI and ISQ). The effect of the implant insertion depth and of the final drill diameter was also investigated. ResultsISQ values increase and UI values decrease as a function of trabecular density, cortical thickness and the screwing of the implant. When the implant diameter varies, the UI values are significantly different for all final drill diameters (except for two), while the ISQ values are similar for all final drill diameters lower than 3.2 mm and higher than 3.3 mm. The error on the estimation of parameters with the QUS device is between 4 and 8 times...
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 0
Unqiue Words: 0

##### #7. Monitoring cementless femoral stem insertion by impact
###### Antoine Tijou, Giuseppe Rosi, Romain Vayron, Hugues Lomami, Philippe Hernigou, Charles-Henri Flouzat-Lachaniette, Guillaume Haiat
The primary stability of the femoral stem (FS) implant determines the surgical success of cementless 15 hip arthroplasty. During the insertion, a compromise must be found for the number and energy of 16 impacts that should be sufficiently large to obtain an adapted primary stability of the FS and not too high 17 to decrease fracture risk. The aim of this study is to determine whether a hammer instrumented with a 18 force sensor can be used to monitor the insertion of FS. 19 Cementless FS of different sizes were impacted in four artificial femurs with an instrumented hammer, 20 leading to 72 configurations. The impact number when the surgeon empirically felt that the FS was fully 21 inserted was noted Nsurg. The insertion depth E was assessed using video motion tracking and the impact 22 number Nvid corresponding to the end of the insertion was estimated. For each impact, two indicators 23 noted I and D were determined based on the analysis of the variation of the force as a function of time. 24 The pull-out force F was...
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 7
Total Words: 0
Unqiue Words: 0

##### #8. Reflection of an ultrasonic wave on the bone-implant interface: effect of the roughness parameters
###### Yoann Hériveaux, Vu-Hieu Nguyen, Vladimir Brailovski, Cyril Gorny, Guillaume Haiat
Quantitative ultrasound can be used to characterize the evolution of the bone-implant interface (BII), which is a complex system due to the implant surface roughness and to partial contact between bone and the implant. The aim of this study is to derive the main determinants of the ultrasonic response of the BII during osseointegration phenomena. The influence of i) the 25 surface roughness parameters and ii) the thickness W of a soft tissue layer on the reflection coefficient r of the BII was investigated using a two-dimensional finite element model. When W increases from 0 to 150 $\mu$m, r increases from values in the range [0.45; 0.55] to values in the range [0.75; 0.88] according to the roughness parameters. An optimization method was developed to determine the sinusoidal roughness profile leading to the most similar ultrasonic 30 response for all values of W compared to the original profile. The results show that the difference between the ultrasonic responses of the optimal sinusoidal profile and of the original profile was...
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 5
Total Words: 0
Unqiue Words: 0

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

Tracking 129,961 papers.

###### Search
Sort results based on if they are interesting or reproducible.
Interesting
Reproducible
Online
###### Stats
Tracking 129,961 papers.