In this paper, the Q-factor expression for periodic arrays over a ground
plane is determined in terms of the electric current density within the array's
unit cell. The expression accounts for the exact shape of the array element.
The Q-factor formula includes integration only over a volume of an element in a
unit cell, and can thus be efficiently implemented numerically. The examples
show good agreement between the proposed Q-factor, the full-wave-calculated
tuned fractional bandwidth, and the input-impedance-based formula by Yaghjian
and Best (2005) for the array of tilted dipoles and the loops array.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 0

Unqiue Words: 0

The reaction concept, introduced by Rumsey in 1954, describes interaction
between time-harmonic electromagnetic sources through the fields radiated by
the sources. In the original form the concept was a scalar quantity defined by
three-dimensional field and source vectors. In the present paper, the
representation is extended to four dimensions applying differential-form
formalism. It turns out that, in a coordinate-free form, the reaction concept
must actually be a one-form, whose temporal component yields Rumsey's scalar
reaction. The spatial one-form component corresponds to a three-dimensional
Gibbsian-vector reaction which consists of electromagnetic force terms.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 0

Unqiue Words: 0

Flexoelectricity is characterised by the coupling of the gradient of the
deformation and the electrical polarization in a dielectric material. A novel
micromorphic approach is presented to accommodate the resulting higher-order
gradient contributions arising in this highly-nonlinear and coupled problem
within a classical finite element setting. The formulation accounts for all
material and geometric nonlinearities, as well as the coupling between the
mechanical, electrical and micromorphic fields. The highly-nonlinear system of
governing equations are derived using the Dirichlet principle and solved using
the finite element method. A series of numerical examples serve to elucidate
the theory and to provide insight into this fascinating effect.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 0

Unqiue Words: 0

In the present article the linear mass Density for vertically suspended heavy
springs is calculated for two different cases. First for a spring of invariable
length suspended at the top and fixed at the bottom of the spring, then for a
hanging heavy spring with an additional load. Both cases are solved by
minimizing the total energy which is a sum of potential energy and energy due
to the deformation.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 1

Total Words: 0

Unqiue Words: 0

The various mathematical models developed over the years to interpret the
behavior of materials and corresponding processes they undergo, were based on
observations and experiments made at that time. Classical laws (such as
Newton's for gravity, Hooke's for elasticity, Navier-Stokes for fluidity,
Fick's/Fourier's for diffusion/heat transfer, Coulomb's for electricity, as
well as Maxwell's for electromagnetism and Einstein's for relativity) formed
the basis of current technology and shaping of our civilization. The discovery
of new phenomena with the aid of newly developed experimental probes have led
to various modifications of these laws across the scale spectrum: from
subatomic and elementary particle physics to cosmology and from atomistic and
nano/micro to macro/giga scales. The emergence of nanotechnology and the
further advancement of space technology are ultimately connected with the
design of novel tools for observation and measurements, as well as the
development of new methods and approaches for quantification and...

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 1

Total Words: 0

Unqiue Words: 0

Theoretical study of superluminal sources of electromagnetic radiation
boosted after the discovery of Cherenkov-Vavilov radiation. Later, the way to
create fictitious sources moving superluminally was suggested. Different
approaches have been proposed for the research of the distribution of the
potential and the fields radiated by the superluminally moving charges. The
simplest idealized cases of uniform rectilinear motion of the charge and of the
charge rotating with constant angular speed open opportunities of a detailed
analysis of the fields and potentials. We use Fourier series to calculate the
potential distribution of point charge rotating with constant speed. An obvious
advantage of this approach is that one no longer needs to calculate the
retarded positions of the charge. The number of the retarded positions depends
on the observation point and increases as the ratio {\omega}{R_0}/c rises,
where c is the speed of light, {\omega} is the rotation frequency, and {R_0} is
the radius of the circle. We demonstrate that...

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 0

Unqiue Words: 0

In this article, we formulate necessary and sufficient polynomial equations
for the existence of a symmetry plane or an order-two axial symmetry for a
totally symmetric tensor of order n $\ge$ 1. These conditions are effective and
of degree n (the tensor's order) in the components of the normal to the plane
(or the direction of the axial symmetry). These results are then extended to
obtain necessary and sufficient polynomial conditions for the existence of such
symmetries for an Elasticity tensor, a Piezo-electricity tensor or a
Piezo-magnetism pseudo-tensor.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 0

Unqiue Words: 0

Elastic material with its elastic tensor losing minor symmetry is considered
impossible without introducing artificially body torque. Here we demonstrate
the feasibility of such material by introducing rotational resonance, the
amplified rotational inertia of the microstructure during dynamical loading
breaks naturally the shear stress symmetry, without resorting to external body
torque or any other active means. This concept is illustrated through a
realistic mass-spring model together with analytical homogenization technique
and band structure analysis. It is also proven that this metamaterial model can
be deliberately tuned to meet the material requirement defined by
transformation method for full control of elastic wave, and the relation
bridging the microstructure and the desired wave functionality is explicitly
given. Application of this asymmetric metamaterial to design elastic wave cloak
is demonstrated and validated by numerical simulation. The study paves the way
for material design used to construct the transformation...

more |
pdf
| html
None.

None.

Sample Sizes : [10]

Authors: 4

Total Words: 7581

Unqiue Words: 2202

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

*Tracking 192,915 papers.*

Sort results based on if they are interesting or reproducible.

Interesting

Reproducible