### Top 10 Arxiv Papers Today in Metric Geometry

##### #1. Intermediate dimensions
###### Kenneth J. Falconer, Jonathan M. Fraser, Tom Kempton
We introduce a continuum of dimensions which are `intermediate' between the familiar Hausdorff and box dimensions. This is done by restricting the families of allowable covers in the definition of Hausdorff dimension by insisting that $|U| \leq |V|^\theta$ for all sets $U, V$ used in a particular cover, where $\theta \in [0,1]$ is a parameter. Thus, when $\theta=1$ only covers using sets of the same size are allowable, and we recover the box dimensions, and when $\theta=0$ there are no restrictions, and we recover Hausdorff dimension. We investigate many properties of the intermediate dimension (as a function of $\theta$), including proving that it is continuous on $(0,1]$ but not necessarily continuous at $0$, as well as establishing appropriate analogues of the mass distribution principle, Frostman's lemma, and the dimension formulae for products. We also compute, or estimate, the intermediate dimensions of some familiar sets, including sequences formed by negative powers of integers, and Bedford-McMullen carpets.
more | pdf | html
###### Tweets
_el_rafa_: @CesarMa00357764 jejeje. Mira, te mando mas de los que no voy a leer https://t.co/wcVX4PfsWQ https://t.co/WOvDzRoEwm
MathPaper: Intermediate dimensions. https://t.co/gi8JQWTRWv
mathMGb: Kenneth J. Falconer, Jonathan M. Fraser, Tom Kempton : Intermediate dimensions https://t.co/mfIzqeFNOk https://t.co/Ms0JMqMsTn
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 7324
Unqiue Words: 1635

##### #2. On the Comparison of Measures of Convex Bodies via Projections and Sections
###### Johannes Hosle
In this manuscript, we study the inequalities between measures of convex bodies implied by comparison of their projections and sections. Recently, Giannopoulos and Koldobsky proved that if convex bodies $K, L$ satisfy $|K|\theta^{\perp}| \le |L \cap \theta^{\perp}|$ for all $\theta \in S^{n-1}$, then $|K| \le |L|$. Firstly, we study the reverse question: in particular, we show that if $K, L$ are origin-symmetric convex bodies in John's position with $|K \cap \theta^{\perp}| \le |L|\theta^{\perp}|$ for all $\theta \in S^{n-1}$ then $|K| \le \sqrt{n}|L|$. The condition we consider is weaker than both the conditions $|K \cap \theta^{\perp}| \le |L \cap \theta^{\perp}|$ and $|K|\theta^{\perp}| \le |L|\theta^{\perp}|$ for all $\theta \in S^{n-1}$ that appear in the Busemann-Petty and Shephard problems respectively. Secondly, we appropriately extend the result of Giannopoulos and Koldobsky to various classes of measures possessing concavity properties, including log-concave measures.
more | pdf | html
None.
###### Tweets
mathMGb: Johannes Hosle : On the Comparison of Measures of Convex Bodies via Projections and Sections https://t.co/1MPnHiLVLQ https://t.co/bsCAPRnTAO
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 1
Total Words: 7895
Unqiue Words: 1788

##### #3. Inner products for Convex Bodies
###### David Bryant, Petru Cioica-Licht, Lisa Orloff Clark, Rachael Young
We define a set inner product to be a function on pairs of convex bodies which is symmetric, Minkowski linear in each dimension, positive definite, and satisfies the natural analogue of the Cauchy-Schwartz inequality (which is not implied by the other conditions). We show that any set inner product can be embedded into an inner product space on the associate support functions, thereby extending fundamental results of Hormander and Radstrom. The set inner product provides a geometry on the space of convex bodies. We explore some of the properties of that geometry, and discuss an application of these ideas to the reconstruction of ancestral ecological niches in evolutionary biology.
more | pdf | html
###### Tweets
mathMGb: David Bryant, Petru Cioica-Licht, Lisa Orloff Clark, Rachael Young : Inner products for Convex Bodies https://t.co/kLgRBoE4Nb https://t.co/m9lxG6lwNm
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 6414
Unqiue Words: 1457

##### #4. A general principle for Hausdorff measure
###### Mumtaz Hussain, David Simmons
We introduce a general principle for studying the Hausdorff measure of limsup sets. A consequence of this principle is the well-known Mass Transference Principle of Beresnevich and Velani (2006).
more | pdf | html
None.
###### Tweets
MathPaper: A general principle for Hausdorff measure. https://t.co/NsAgASlQQ5
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 2797
Unqiue Words: 845

##### #5. On uniform measures in the Heisenberg group
###### Vasilis Chousionis, Valentino Magnani, Jeremy T. Tyson
We initiate a classification of uniform measures in the first Heisenberg group $\mathbb H$ equipped with the Kor\'anyi metric $d_H$, that represents the first example of a noncommutative stratified group equipped with a homogeneous distance. We prove that $1$-uniform measures are proportional to the spherical $1$-Hausdorff measure restricted to an affine horizontal line, while $2$-uniform measures are proportional to spherical $2$-Hausdorff measure restricted to an affine vertical line. It remains an open question whether $3$-uniform measures are proportional to the restriction of spherical $3$-Hausdorff measure to an affine vertical plane. We establish this conclusion in case the support of the measure is a vertically ruled surface. Along the way, we derive asymptotic formulas for the measures of small extrinsic balls in $({\mathbb H},d_H)$ intersected with smooth submanifolds. The coefficients in our power series expansions involve intrinsic notions of curvature associated to smooth curves and surfaces in $\mathbb H$.
more | pdf | html
None.
###### Tweets
MathPaper: On uniform measures in the Heisenberg group. https://t.co/Ktpaw4TiUA
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 15587
Unqiue Words: 2863

##### #6. On a relation between packing and covering densities of convex bodies
###### Roman Prosanov
We show that a convex body admits a translative dense packing in $\mathbb{R}^d$ if and only if it admits a translative economical covering.
more | pdf | html
None.
###### Tweets
MathPaper: On a relation between packing and covering densities of convex bodies. https://t.co/I7xIyOB6CQ
mathMGb: Roman Prosanov : On a relation between packing and covering densities of convex bodies https://t.co/7SZ5VWo6Uz https://t.co/aJG9QELu4q
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 1
Total Words: 3343
Unqiue Words: 917

##### #7. Congruent and non-congruent hyperball packings related to doubly truncated Coxeter orthoschemes in hyperbolic $3$-space
###### Jenő Szirmai
In \cite{Sz17-2} we considered hyperball packings in $3$-dimensional hyperbolic space. We developed a decomposition algorithm that for each saturated hyperball packing provides a decomposition of $\HYP$ into truncated tetrahedra. In order to get a density upper bound for hyperball packings, it is sufficient to determine the density upper bound of hyperball packings in truncated simplices. Therefore, in this paper we examine the doubly truncated Coxeter orthoscheme tilings and the corresponding congruent and non-congruent hyperball packings. We proved that related to the mentioned Coxeter tilings the density of the densest congruent hyperball packing is $\approx 0.81335$ that is -- by our conjecture -- the upper bound density of the relating non-congruent hyperball packings too.
more | pdf | html
###### Tweets
MathPaper: Congruent and non-congruent hyperball packings related to doubly truncated Coxeter orthoschemes in hyperbolic $3$-space. https://t.co/NWSDHO89Jy
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 1
Total Words: 7263
Unqiue Words: 1597

##### #8. Ergodic theorem in Hadamard spaces in terms of inductive means
###### Jorge Antezana, Eduardo Ghiglioni, Demetrio Stojanoff
Let (G,+) be a compact, abelian, and metrizable topological group. In this group we take $g\in G$ such that the corresponding automorphism t_g is ergodic. The main result of this paper is a new ergodic theorem for functions in L^1(G,M), where M is a Hadamard space. The novelty of our result is that we use inductive means to average the elements of the orbit {t_g^n(h)}_{n\in N}. The advantage of inductive means is that they can be explicitly computed in many important examples. The proof of the ergodic theorem is done firstly for continuous functions, and then it is extended to L^1 functions. The extension is based in a new construction of mollifiers in Hadamard spaces. This construction has the advantage that it only uses the metric structure and the existence of barycenters, and do not require the existence of an underlying vector space. For this reason, it can be used in any Hadamard space, in contrast with those results that need to use the tangent space or some chart to define the mollifier.
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 7441
Unqiue Words: 1797

##### #9. A convex combinatorial property of compact sets in the plane and its roots in lattice theory
###### Gábor Czédli, Árpád Kurusa
K. Adaricheva and M. Bolat have recently proved that if $U_0$ and $U_1$ are circles in a triangle with vertices $A_0,A_1,A_2$, then there exist $j\in \{0,1,2\}$ and $k\in\{0,1\}$ such that $U_{1-k}$ is included in the convex hull of $U_k\cup(\{A_0,A_1, A_2\}\setminus\{A_j\})$. One could say disks instead of circles. Here we prove the existence of such a $j$ and $k$ for the more general case where $U_0$ and $U_1$ are compact sets in the plane such that $U_1$ is obtained from $U_0$ by a positive homothety or by a translation. Also, we give a short survey to show how lattice theoretical antecedents, including a series of papers on planar semimodular lattices by G. Gratzer and E. Knapp, lead to our result.
more | pdf | html
None.
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 13714
Unqiue Words: 2793

##### #10. Computer geometry: Rep-tiles with a hole
###### Christoph Bandt, Dmitry Mekhontsev
A cube is an 8-rep-tile: it is the union of eight smaller copies of itself. Is there a set with a hole which has this property? The computer found an interesting and complicated solution, which then could be simplified. We discuss some problems of computer-assisted research in geometry.
more | pdf | html
###### Tweets
MathPaper: Computer geometry: Rep-tiles with a hole. https://t.co/yULAGd6rIX
mathMGb: Christoph Bandt, Dmitry Mekhontsev : Computer geometry: Rep-tiles with a hole https://t.co/X7wrA1k0IM https://t.co/0LZkqYthpQ
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 2533
Unqiue Words: 1063

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

Tracking 57,756 papers.

###### Search
Sort results based on if they are interesting or reproducible.
Interesting
Reproducible
Online
###### Stats
Tracking 57,756 papers.