Path following and lateral stability are crucial issues for autonomous
vehicles. Moreover, these problems increase in complexity when handling
articulated heavy-duty vehicles due to their poor manoeuvrability, large sizes
and mass variation. In addition, uncertainties on mass may have the potential
to significantly decrease the performance of the system, even to the point of
destabilising it. These parametric variations must be taken into account during
the design of the controller. However, robust control techniques usually
require offline adjustment of auxiliary tuning parameters, which is not
practical, leading to sub-optimal operation. Hence, this paper presents an
approach to path-following and lateral control for autonomous articulated
heavy-duty vehicles subject to parametric uncertainties by using a robust
recursive regulator. The main advantage of the proposed controller is that it
does not depend on the offline adjustment of tuning parameters. Parametric
uncertainties were assumed to be on the payload, and an...

more |
pdf
| html
None.

None.

Sample Sizes : None.

Authors: 5

Total Words: 7493

Unqiue Words: 1964

This paper studies the performance of a feedback control loop closed via an
error-free digital communication channel with transmission delay. The system
comprises a discrete-time noisy linear time-invariant (LTI) plant whose single
measurement output is mapped into its single control input by a causal, but
otherwise arbitrary, coding and control scheme. We consider a single-input
multiple-output (SIMO) channel between the encoder-controller and the
decoder-controller which is lossless and imposes random time delay. We derive a
lower bound on the minimum average feedback data rate that guarantees achieving
a certain level of average quadratic performance over all possible realizations
of the random delay. For the special case of a constant channel delay, we
obtain an upper bound by proposing linear source-coding schemes that attain
desired performance levels with rates that are at most 1.254 bits per sample
greater than the lower bound. We give a numerical example demonstrating that
bounds and operational rates are increasing...

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 14473

Unqiue Words: 2742

This paper experimentally evaluates continuum deformation cooperative control
for the first time. Theoretical results are expanded to place a bounding
triangle on the leader-follower system such that the team is contained despite
nontrivial tracking error. Flight tests were conducted with custom quadrotors
running a modified version of ArduPilot on a BeagleBone Blue in M-Air, an
outdoor netted flight facility. Motion capture and an onboard inertial
measurement unit were used for state estimation. Position error was
characterized in single vehicle tests using quintic spline trajectories and
different reference velocities. Five-quadrotor leader trajectories were
generated, and followers executed the continuum deformation control law
in-flight. Flight tests successfully demonstrated continuum deformation; future
work in characterizing error propagation from leaders to followers is
discussed.

more |
pdf
| html
ComputerPapers:
Experimental Evaluation of Continuum Deformation with a Five Quadrotor Team. https://t.co/gHUxuTGbb1

None.

None.

Sample Sizes : None.

Authors: 8

Total Words: 5082

Unqiue Words: 1745

This paper presents the design of a nonlinear control law for a typical
electromagnetic actuator system. Electromagnetic actuators are widely
implemented in industrial applications, and especially as linear positioning
system. In this work, we aim at taking into account a magnetic phenomenon that
is usually neglected: flux fringing. This issue is addressed with an uncertain
modeling approach. The proposed control law consists of two steps, a
backstepping control regulates the mechanical part and a sliding mode approach
controls the coil current and the magnetic force implicitly. An illustrative
example shows the effectiveness of the presented approach.

more |
pdf
| html
None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 4777

Unqiue Words: 1460

Stabilization of linear systems with unknown dynamics is a canonical problem
in adaptive control. Since the lack of knowledge of system parameters can cause
it to become destabilized, an adaptive stabilization procedure is needed prior
to regulation. Therefore, the adaptive stabilization needs to be completed in
finite time. In order to achieve this goal, asymptotic approaches are not very
helpful. There are only a few existing non-asymptotic results and a full
treatment of the problem is not currently available.
In this work, leveraging the novel method of random linear feedbacks, we
establish high probability guarantees for finite time stabilization. Our
results hold for remarkably general settings because we carefully choose a
minimal set of assumptions. These include stabilizability of the underlying
system and restricting the degree of heaviness of the noise distribution. To
derive our results, we also introduce a number of new concepts and technical
tools to address regularity and instability of the closed-loop matrix.

more |
pdf
| html
None.

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 7541

Unqiue Words: 1835

Dynamical system-based linear transfer Perron- Frobenius (P-F) operator
framework is developed to address analysis and design problems in the building
system. In particular, the problems of fast contaminant propagation and optimal
placement of sensors in uncertain operating conditions of indoor building
environment are addressed. The linear nature of transfer P-F operator is
exploited to develop a computationally efficient numerical scheme based on the
finite dimensional approximation of P-F operator for fast propagation of
contaminants. The proposed scheme is an order of magnitude faster than existing
methods that rely on simulation of an advection-diffusion partial differential
equation for contami- nant transport. Furthermore, the system-theoretic notion
of observability gramian is generalized to nonlinear flow fields using the
transfer P-F operator. This developed notion of observability gramian for
nonlinear flow field combined with the finite dimensional approximation of P-F
operator is used to provide a systematic procedure...

more |
pdf
| html
None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 5620

Unqiue Words: 1728

This paper proposes a novel wind power smoothing control paradigm in context
of performance-based regulation service. Conventional methods aim at adjusting
wind power output using hard-coded filtering algorithms that can result in
visually smoothed power output with unmeasurable impacts on system
generation-demand balance. Distinguished from conventional methods, the newly
proposed control method smooths wind power output from a power system
perspective by using the regulation mileage as a key performance indicator. To
simultaneously address the system needs and maximize wind energy harvesting, a
mileage-responsive framework is developed to enable wind farms to optimally
generate smoothing power. The effectiveness of the proposed method is well
demonstrated through case studies, of which the simulation results shows a
great potential for practical applications.

more |
pdf
| html
ComputerPapers:
Mileage-responsive Wind Power Smoothing. https://t.co/9mnYOauVvk

None.

None.

Sample Sizes : None.

Authors: 4

Total Words: 2457

Unqiue Words: 1007

In this paper we generalize three identification recursive algorithms
belonging to the pseudo-linear class, by introducing a predictor established on
a generalized orthonormal function basis. Contrary to the existing
identification schemes that use such functions, no constraint on the model
poles is imposed. Not only this predictor parameterization offers the
opportunity to relax the convergence conditions of the associated recursive
schemes, but it entails a modification of the bias distribution linked to the
basis poles. This result is specific to pseudo-linear regression properties,
and cannot be transposed to most of prediction error method algorithms. A
detailed bias distribution is provided, using the concept of equivalent
prediction error, which reveals strong analogies between the three proposed
schemes, corresponding to ARMAX, Output Error and a generalization of ARX
models. That leads to introduce an indicator of the basis poles location effect
on the bias distribution in the frequency domain. As shown by the...

more |
pdf
| html
ComputerPapers:
Pseudo-linear regression identification based on generalized orthonormal transfer functions: Convergence conditions and bias distribution. https://t.co/pKtvYB4NmZ

None.

None.

Sample Sizes : None.

Authors: 2

Total Words: 8325

Unqiue Words: 1848

Agent-based modeling and simulation (ABMS) has been a popular approach to
modeling autonomous and interacting agents in a multi-agent system.
Specifically, ABMS can be applied to connected and automated vehicles (CAVs),
since CAVs can be driven autonomously with the help of on-board sensors, and
cooperate with each other through vehicle-to-everything (V2X) communications.
In this work, we apply ABMS to CAVs using the game engine Unity3D, taking
advantage of its visualization capability and other capabilities. Agent-based
models of CAVs are built in the Unity3D environment, where vehicles are enabled
with connectivity and autonomy by C#-based scripting API. We also build a
simulation network in Unity3D based on the city of Mountain View, California. A
case study of cooperative on-ramp merging has been carried out with the
proposed distributed consensus-based protocol, and then compared with the
human-in-the-loop simulation where the on-ramp vehicle is driven by four
different human drivers on a driving simulator. The benefits of...

more |
pdf
| html
None.

None.

Sample Sizes : None.

Authors: 5

Total Words: 6124

Unqiue Words: 1878

Owing to the rapid growth number of vehicles, urban traffic congestion has
become more and more severe in the last decades. As an effective approach,
Model Predictive Control (MPC) has been applied to urban traffic signal control
system. However, the potentially high online computation burden may limit its
further application for real scenarios. In this paper, a new approach based on
online active set strategy is proposed to improve the real-time performance of
MPC-based traffic controller by reducing the online computing time. This
approach divides one control cycle into several sequential sampling intervals.
In each interval, online active set method is applied to solve quadratic
programming (QP) of traffic signal control model, by searching the optimal
solution starting at the optimal solution of previous interval in the feasible
region. The most appealing property of this approach lies in that it can
distribute the computational complexity into several sample intervals, instead
of imposing heavy computation burden at each end...

more |
pdf
| html
ComputerPapers:
Computation Load Balancing Real-Time Model Predictive Control in Urban Traffic Networks. https://t.co/K9KYJb0Sbg

None.

None.

Sample Sizes : None.

Authors: 3

Total Words: 6608

Unqiue Words: 1979

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

*Tracking 72,893 papers.*

Sort results based on if they are interesting or reproducible.

Interesting

Reproducible