### Top 10 Arxiv Papers Today in Soft Condensed Matter

##### #1. Direct Measurement of the Elastohydrodynamic Lift Force at the Nanoscale
###### Zaicheng Zhang, Vincent Bertin, Muhammad Arshad, Elie Raphael, Thomas Salez, Abdelhamid Maali
Friction in soft and wet contacts is crucial for industry and engineering, but it might also play a central role for the motion of various physiological and biological entities, as well as for the nanorheology of very soft materials. Here, we report on the first direct measurement of the elastohydrodynamic lift force acting on a sphere moving within a viscous liquid, near and along a soft substrate under nanometric confinement. Using atomic force microscopy, the lift force is probed as a function of the gap size, for various driving velocities, viscosities, and stiffnesses. The results are in excellent agreement with scaling arguments and a novel quantitative model developed from the soft lubrication theory, in linear elasticity, and for small compliances. For larger compliances, or equivalently for smaller confinement length scales, a saturation of the lift force is observed and its empirical scaling law is discussed.
more | pdf | html
None.
###### Tweets
sanli: Direct Measurement of the Elastohydrodynamic Lift Force at the Nanoscale. [nanosurfing!] (arXiv:1907.05849v1 [cond-mat.soft]) https://t.co/KDFBWnqhnl #preprint
CondensedPapers: Direct Measurement of the Elastohydrodynamic Lift Force at the Nanoscale. https://t.co/PSHhmFrtzR
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 6
Total Words: 0
Unqiue Words: 0

##### #2. Which wavenumbers determine the thermodynamic stability of soft matter quasicrystals?
###### D. J. Ratliff, A. J. Archer, P. Subramanian, A. M. Rucklidge
For soft matter to form quasicrystals an important ingredient is to have two characteristic lengthscales in the interparticle interactions. To be more precise, for stable quasicrystals, periodic modulations of the local density distribution with two particular wavenumbers should be favored, and the ratio of these wavenumbers should be close to certain special values. So, for simple models, the answer to the title question is that only these two ingredients are needed. However, for more realistic models, where in principle all wavenumbers can be involved, other wavenumbers are also important, specifically those of the second and higher reciprocal lattice vectors. We identify features in the particle pair interaction potentials which can suppress or encourage density modes with wavenumbers associated with one of the regular crystalline orderings that compete with quasicrystals, enabling either the enhancement or suppression of quasicrystals in a generic class of systems.
more | pdf | html
###### Tweets
SciencePapers: Which wavenumbers determine the thermodynamic stability of soft matter quasicrystals?. https://t.co/S8mGfGEJ0N
shigekomura: Which wavenumbers determine the thermodynamic stability of soft matter quasicrystals? https://t.co/TO4KtRFSIU
KomaToug: RT @shigekomura: Which wavenumbers determine the thermodynamic stability of soft matter quasicrystals? https://t.co/TO4KtRFSIU
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 4667
Unqiue Words: 1753

##### #3. Maxwell plates and phonon fractionalization
###### Kai Sun, Xiaoming Mao
In the past a few years, topologically protected mechanical phenomena have been extensively studied in discrete lattices and networks, leading to a rich set of discoveries such as topological boundary/interface floppy modes and states of self stress, as well as one-way edge acoustic waves. In contrast, topological states in continuum elasticity without repeating unit cells remain largely unexplored, but offer wonderful opportunities for both new theories and broad applications in technologies, due to their great convenience of fabrication. In this paper we examine continuous elastic media on the verge of mechanical instability, extend Maxwell-Calladine index theorem to continua in the nonlinear regime, classify elastic media based on whether stress can be fully released, and identify two types of elastic media with topological states. The first type, which we name Maxwell plates'', are in strong analogy with Maxwell lattices, and exhibit a sub-extensive number of holographic floppy modes. The second type, which arise in thin...
more | pdf | html
None.
###### Tweets
CondensedPapers: Maxwell plates and phonon fractionalization. https://t.co/jZHVyAAhAo
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 0
Unqiue Words: 0

##### #4. Flexoelxctricity of the distorted twist bend nematic phase
###### I. Lelidis, E. Kume
Mesogenic dimers in the twist-bend nematic phase exhibit much higher flexoelectric polarization than in their uniform nematic phase. In order to theoretically investigate this data, we extend the symmetry based linear elastic theory of the twist-bend nematic phase developed in Phys. Rev. E 92, 030501(R) 2015, by including flexoelectricity under the action of an external electric field perpendicular to the helical axis. We show that at the nematic towards twist-bend nematic transition, a new flexoelectric mode becomes active. Consequently, the present model predicts the increase of the effective flexoelectric coefficient when the system is entering the twist-bend nematic phase. The influence of the flexoelectric coupling on the equilibrium wavevector and the spontaneous heliconical tilt angle are investigated. The electroclinic coefficient is calculated. Finally we argue that the helix could be unwound giving rise to a splay-bend nematic phase.
more | pdf | html
None.
###### Tweets
CondensedPapers: Flexoelxctricity of the distorted twist bend nematic phase. https://t.co/YVoXatWyw4
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 3790
Unqiue Words: 1281

##### #5. Martini coarse-grained model for clay-polymer nanocomposites
###### Parvez khan, Gaurav Goel
We have developed a coarse-grained (CG) model of a polymer-clay system consisting of organically modified montmorillonite nanoclay as the nanoparticle in accordance with the MARTINI forcefield. We have used mechanical properties and cleavage free energy of clay particle to respectively parameterize bonded and nonbonded interaction parameters for an organically modified montmorillonite (oMMT) clay particle where intergallery Na+ ions are replaced by tetramethylammonium (TMA) ions. The mechanical properties were determined from the slope of stress-strain curve and cleavage free energy was determined by allowing for full surface reconstruction corresponding to a slow equilibrium cleavage process. Individual dispersive and polar contributions to oMMT cleavage energy were used for determination of appropriate MARTINI bead types for CG oMMT sheet. The self-consistency of developed MARTINIFF parameters for TMA-MMT-polymer system was verified by comparing estimates for select structural, thermodynamic, and dynamic properties obtained in...
more | pdf | html
None.
###### Tweets
CondensedPapers: Martini coarse-grained model for clay-polymer nanocomposites. https://t.co/eYmYBdP5qq
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 0
Unqiue Words: 0

##### #6. Dissipative particle dynamics with energy conservation: isoenergetic integration and transport properties
###### Fatemeh A. Soleymani, Marisol Ripoll, Gerhard Gompper, Dmitry A. Fedosov
Simulations of nano- to micro-meter scale fluidic systems under thermal gradients require consistent mesoscopic methods accounting for both hydrodynamic interactions and proper transport of energy. One such method is dissipative particle dynamics with energy conservation (DPDE), which has been used for various fluid systems with non-uniform temperature distributions. Despite the success of the method, existing integration algorithms have shown to result in an undesired energy drift, putting into question whether the DPDE method properly captures properties of real fluids. We propose a modification of the velocity-Verlet algorithm with local energy conservation for each DPDE particle, such that the total energy is conserved up to machine precision. Furthermore, transport properties of a DPDE fluid are analyzed in detail. In particular, an analytical approximation for the thermal conductivity coefficient is derived, which allows the selection of a specific value a priori. Finally, we provide approximate expressions for the...
more | pdf | html
###### Tweets
CondensedPapers: Dissipative particle dynamics with energy conservation: isoenergetic integration and transport properties. https://t.co/KtGdFUNkQi
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 8730
Unqiue Words: 2358

##### #7. Rectification of energy and motion in non-equilibrium parity violating metamaterials
###### Zhenghan Liao, William T. M. Irvine, Suriyanarayanan Vaikuntanathan
Uncovering new mechanisms for rectification of stochastic fluctuations has been a longstanding problem in non-equilibrium statistical mechanics. Here, using a model parity violating metamaterial that is allowed to interact with a bath of active energy consuming particles, we uncover new mechanisms for rectification of energy and motion. Our model active metamaterial can generate energy flows through an object in the absence of any temperature gradient. The nonreciprocal microscopic fluctuations responsible for generating the energy flows can further be used to power locomotion in, or exert forces on, a viscous fluid. Taken together, our analytical and numerical results elucidate how the geometry and inter-particle interactions of the parity violating material can couple with the non-equilibrium fluctuations of an active bath and enable rectification of energy and motion.
more | pdf | html
None.
###### Tweets
CondensedPapers: Rectification of energy and motion in non-equilibrium parity violating metamaterials. https://t.co/LzuujotlrO
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 0
Unqiue Words: 0

##### #8. Crystalline clusters in mW water: stability, growth, and grain boundaries
###### Fabio Leoni, Rui Shi, Hajime Tanaka, John Russo
With numerical simulations of the mW model of water, we investigate the energetic stability of crystalline clusters for both Ice I (cubic and hexagonal ice) and for the metastable Ice 0 phase as a function of the cluster size. Under a large variety of forming conditions, we find that the most stable cluster changes as a function of size: at small sizes the Ice 0 phase produces the most stable clusters, while at large sizes there is a crossover to Ice I clusters. We further investigate the growth of crystalline clusters with the seeding technique and study the growth patterns of different crystalline clusters. While energetically stable at small sizes, the growth of metastable phases (cubic and Ice 0) is hindered by the formation of coherent grain boundaries. A five-fold symmetric twin boundary for cubic ice, and a newly discovered coherent grain boundary in Ice 0, that promotes cross nucleation of cubic ice. Our work reveals that different local structures can compete with the stable phase in mW water, and that the low energy cost...
more | pdf | html
None.
###### Tweets
CondensedPapers: Crystalline clusters in mW water: stability, growth, and grain boundaries. https://t.co/I6LxMk47fx
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 4
Total Words: 0
Unqiue Words: 0

##### #9. Long-term memory and delayed shear localisation in soft glassy materials
###### Henry A. Lockwood, Matthew P. Carrington, Suzanne M. Fielding
We study theoretically the dynamics of soft glassy materials during the process of stress relaxation following the rapid imposition of a shear strain. By detailed numerical simulations of a mesoscopic soft glassy rheology model and three different simplified continuum fluidity models, we show that a dramatic shear localisation instability arises, in which the strain field suddenly becomes heterogeneous within the sample, accompanied by a precipitous drop in the stress. Remarkably, this instability can arise at extremely long delay times after the strain was applied, due to the long-term memory inherent to glassy systems. The finding that a catastrophic mechanical instability can arise long after any deformation could have far reaching consequences for material processing and performance, and potentially also for delayed geophysical phenomena.
more | pdf | html
None.
###### Tweets
CondensedPapers: Long-term memory and delayed shear localisation in soft glassy materials. https://t.co/nxe2kvZeZk
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 3
Total Words: 0
Unqiue Words: 0

##### #10. Dipolophoresis in concentrated suspensions of ideally polarizable spheres
###### Siamak Mirfendereski, Jae Sung Park
The dynamics of ideally polarizable spherical particles in concentrated suspensions under the effects of nonlinear electrokinetic phenomena is analysed using large-scale numerical simulations. Particles are assumed to carry no net charge and considered to undergo the combination of dielectrophoresis and induced-charge electrophoresis termed dipolophoresis. Chaotic motion and resulting hydrodynamic diffusion are known to be driven by the induced-charge electrophoresis, which dominates the dielectrophoresis. Up to a volume fraction $\phi \approx 35\%$, the particle dynamics seems to be hindered by the increase in the magnitude of excluded volume interactions with concentration. However, a non-trivial suspension behaviour is observed in concentrated regimes, where the hydrodynamic diffusivity starts to increase with a volume fraction at $\phi \approx 35\%$ before reaching a local maximum and then drastically decreases as approaching random close packing. Similar non-trivial behaviours are observed in the particle velocity and...
more | pdf | html
###### Tweets
CondensedPapers: Dipolophoresis in concentrated suspensions of ideally polarizable spheres. https://t.co/7idKvHlDSI
None.
None.
###### Other stats
Sample Sizes : None.
Authors: 2
Total Words: 6113
Unqiue Words: 1750

Assert is a website where the best academic papers on arXiv (computer science, math, physics), bioRxiv (biology), BITSS (reproducibility), EarthArXiv (earth science), engrXiv (engineering), LawArXiv (law), PsyArXiv (psychology), SocArXiv (social science), and SportRxiv (sport research) bubble to the top each day.

Papers are scored (in real-time) based on how verifiable they are (as determined by their Github repos) and how interesting they are (based on Twitter).

To see top papers, follow us on twitter @assertpub_ (arXiv), @assert_pub (bioRxiv), and @assertpub_dev (everything else).

To see beautiful figures extracted from papers, follow us on Instagram.

Tracking 158,360 papers.

###### Search
Sort results based on if they are interesting or reproducible.
Interesting
Reproducible
Online
###### Stats
Tracking 158,360 papers.